Bronze Casting

The amazing and mysterious world of bronze casting!

This photo series is from last week at Shadetree Studio, a local fine art foundry/studio owned and operated by artist Pat Cochran.  I've mentioned him before.  He's the same artist who created the recycled sculpture a few posts ago.  Pat is a prolific artist whose sculptures grace the Treasure Coast landscape.

The furnace is fired up and the bronze ingots are pre-heating.

Pat places an ingot into the crucible

through the hole in the top of the furnace.

Suiting up.  

Skimming impurities from the surface of the molten bronze.

The molds, pre-heating to around 1400 degrees F.

The molds have been covered with sand.

This helps keep them hot until they are filled with bronze.

The tinfoil covers keeps the sand out of the molds. 

Removing the crucible from the furnace. 

Pouring the bronze into the molds.

Pouring the molten bronze, close up.

The bronze is approximately 2200 degrees F.

The molds after they have been filled.  At this point

the bronze has already solidified, but is still red hot. 

Replacing the crucible into the furnace for the next pour of the day.

Carrying the very hot molds out to the cool down area.

While the bronze is no longer red hot, it still is too hot

to handle directly.

Cooling down.

Still VERY hot, the molds will cool down more

before the shell is knocked off the bronze.

I love watching a bronze pour and consider myself lucky

to have had the opportunity numerous times.

 I think the big draw for me is that unbelievable molten 

metal that is the most indescribable orange.